Main menu:
Arduino Mega 2560 R3 Board
The Arduino Mega 2560 R3 is based on the ATmega2560.
It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-
Input Voltage (limits): 6-
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
4 HARDWARE SERIAL PORT PINS
Serial 0 : 0 (RX) and 1 (TX);
Serial 1 : 19 (RX) and 18 (TX);
Serial 2 : 17 (RX) and 16 (TX);
Serial 3 : 15 (RX) and 14 (TX).