RT809H EMMC-Nand Flash Extremely Fast Universal Programmer Kit
Programmer + 29pcs Adapters With Cables
1 x RT809H UNIVERSAL PROGRAMMER 1 x TSOP48 ORIGNAL SOCKET 1 x TSOP56 ORIGNAL SOCKET
1 x SOP44 SOCKET 1 x USB Cable 1 x VGA Cable 1 x CD/pendrive Software 1 x SOP PAST Socket.
1 x SOIC8-DIP8 ZIF adapter (205mil) 1 x SOP8 -DIP8 adapter(~150 mil) 1 x SOP16 150MIL
1 x SOP28 300MIL(ALSO SUPPORT SOP20 SOP18 300MIL) 1 x SOP16 300MIL 1 x SOP20 200MIL
1 x PLCC44 1 x PLCC32 1 x PLCC28 1 x PLCC20 1 x SSOP28 TO DIP28 1 x TSSOP8 TO DIP8
1 x KB9012 Board 1 x SOP8 TEST Clip 1 x Keyboard Interface 1 x TSOP-VSOP-SSOP ADAPTER
2 x IT8587 IT8585E FLAT CABLE 2 x ISP CABLES 1 x ISCP Adapter with wire 1 x SOP20 300MIL
2 x FPC with wire 1 x 1.8V Aadapter 1 x SOP16 Simple board 1 x MSOP8 SOP8 Simple board
1 x SOP16 SOP8 simple board 1 x PLCC extractor 1 x RT-SOP-A Cable
- The Only universal programmer which can automatically detect chip number for all Chips.
- The only universal programmer which can acept IC in any position and make intelligent sense.
- The Only universal programmer Support Read and program Laptop I/O via keyboard line.
- The Only universal programmer Support Read and Program LCD TV VIA VGA and HDMI PORT.
- The Only universal programmer Support ADD new flash by yourself.
- The Only universal programmer built in Most of repair applications TV,DVD,DVB,and many isp software.
- The Only universal programmer make selftest for LCD TV itself and diagnostic fault.
- The best programmer to read and programing flash on motherboard without removing out.
· High programming speed.
· ISP connector for in-circuit programming.
· Advanced and powerful software functions.
· Can support any flash and very easy to add new flash.
· 48-pins powerful pindrivers, no adapter required for any DIL devices.
· VGA port to read and write LCD TV-MONITORS without disassembly.
· HDMI port to read and write LCD TV-MONITORS without disassembly.
· Connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface.
· Comfortable and easy to use control program, works with all versions of MS Windows.
· supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.
· The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.
· Support Auto select for any series of flash including TSOP48-NAND-EMMC-PLCC,ETC however Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help.
Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
· All known data formats are supported. Automatic file format detection and conversion during loading of file.
· The software also provide a special information about programmed device. As a special, the drawings of all available packages are provided.
· The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip,
recommended target design around in-circuit programmed chip and other necessary information.
- Support UPTO 64GB NAND FLASH.
- Support Read and Programming OTP area.
- Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 nand FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.