USB TO I2C MODULE
FT200XD is a usb to I2C interface with the following advanced features:
Single chip usb to I2C interface.
Up to 3.4MHZ,high speed mode,I2C supported
Entire usb protocol handled on the chip. no usb specific firmware programming required.
Fully integrated 2048 byte multi-time-programmable(mtp) memory storing device descriptors and cbus I/O configuration.
512 byte receive buffer and 512 byte transmit usb power configurations;supports bus-powered,self-powered and bus-powered with power switching.
integrated +3.3V level converter for usb I/O.
true 3.3VCMOS drive output and TTLinput; operates down to 1V8 with external pull-ups.
tolerant of 5Vinput.
configurable I/O pin output drive strength;4MA(min)and 16mA(MAX).
FULLY INTEGRATED AVCC suppy filtering - no external filtering required.
+ 5V single supply opeartion.
internal 3V3/1V8 LDO regulators