This is a simple to use, USB to serial base unit for the XBee modules. This unit works with all XBee modules including the Series 1 and Series 2, Pro version & Tarang modules. Plug the unit into the XBee Explorer, attach an USB cable, and you will have direct access to the serial and programming pins on the XBee unit.
The board has an on board 3.3v regulator, as all XBees work on 3.3v DC.
No external power required.Powered by USB.
Header socket to host XBEE
FTI chip used for USB-UART conversion.Drivers to be installed to enable functioning.