Main menu:
SKYTRAQ GPS Receiver with ceramic POT Antenna provides reliable positioning, navigation, and timing services to worldwide users on a continuous basis in all weather, day and night, anywhere on the Earth.
Global Positioning System (GPS) satellites broadcast signals from space that GPS receivers, use to provide three-
GPS SKYTRAQ
The output is serial data of 9600 baud rate which is standard NMEA 0183 v3.0 protocol offering industry standard data messages and a command set for easy interface to mapping software like Trimble Studio and embedded devices like Microcontrollers.
Features
Both RS232 & TTL signal outputs.Very easy to interface with Microcontrollers.
• High sensitivity -
• Low power consumption
• GPS L1 C/A Code
• Supports NMEA0183 V 3.01 data protocol
• Real time navigation for location based services
• Works from +5V DC signal and outputs 9600 bps serial data
• Ceramic POT antenna built on module.
• Used in Car Navigation and Marine Navigation, Fleet Management & Vehicle Tracking.
Specification
Operating Voltage 5 V V DC Regulated Power Supply & Operating Current 150 mA
Sensitivity -
L1 C/A code Protocol output baud rate 9600 bps no handshaking(8-
Protocol format NMEA0183 V 3.01 GGA,GLL,GSA,GSV,RMC,VTG
Output Voltage level 3.3V signals Serial UART interfacing directly to microcontrollers working at 5V and 3V
Frequency 1,1575.42 Mhz
C/A Code 1.023 Mhz chip rate
Accuracy in Position 5 Meters ,Accuracy in Velocity 0.1 Meters/Second ,Accuracy in Time 0.1 Microsecond.
Time to First Fix for first power on 33 Second approx. ,Time to Reacquisition 2 Second
Update Rate 1 Hz
Downloads
SKYTRAQ DATASHEET
TRIMBLE STUDIOsoftware
VIDEO DEMO
OUR BLOG